home *** CD-ROM | disk | FTP | other *** search
- Make sure your Futaba/Hitec transmitter is on PPM mode.
- Press F3 and Calibrate before use. Make sure sticks are
- pushed to maximum positions on ALL modes before hitting
- OK.
-
- Airplanes: Increase throttle until tail is off the ground.
- Slowly apply more throttle to maximum then slowly add up
- elevator. Decrease throttle slightly to cruising speed
- after take-off. Operate rudder to control direction. The
- Trainer is rudder controlled only. For other planes, use
- ailerons to control heading.
-
- Helicopters: Slowly increase throttle/collective to
- take-off. Use pitch and roll controls (as in plane) and
- control direction (yaw) with rudder.
-
- Note:Press F12 to reset after a crash. Use keys
- F4-F11 to change view.